How To Use The Automatic Tray Sealing Machine

The usage of Automatic Tray Sealing Machine mainly includes the following steps:

1. Preparation
Check the equipment: Make sure the sealer is properly installed, the power cord is firmly connected, the sealing film is sufficient, and the machine is clean and free of debris.
Load the tray: Place the tray to be sealed on the workbench of the sealer to ensure that the tray is flat and not skewed.
2. Set parameters
Adjust parameters: Adjust the sealing speed, temperature and other settings according to the material of the tray and the thickness of the film. When using it for the first time, you may need to make fine adjustments according to the guidance provided by the manufacturer.
Preheat the equipment: Connect the power, turn on the power switch, the indicator light is on, set the thermostat to the preset temperature, and wait for the equipment to preheat to the set temperature.
3. Sealing operation
Start sealing: Press the start button and the sealer starts working. The film on the tray will be cut by the hot knife and melt quickly to form a tight seal.
Check the quality: After the sealing is completed, gently shake the tray to confirm whether the seal is firm and there is no air leakage.
4. Cleaning and maintenance
Cleaning equipment: Regularly clean the hot cutter and workbench of the sealing machine to keep them in good working condition.
Maintaining equipment: Regularly check the various parts of the equipment to ensure their normal operation and extend the life of the equipment.
5. Precautions
Safe operation: During operation, avoid putting your hands on high-temperature parts to avoid burns.
Equipment maintenance: It is strictly forbidden to idle the equipment. The machine must be turned off when no one is working for a long time to avoid waste of resources.

Through the above steps, you can use the automatic pallet sealing machine correctly to ensure the quality and efficiency of pallet sealing.