How To Use The Food Container Sealing Machine

The usage of Food Container Sealer Machine varies mainly according to the type of machine (such as manual, touch screen, portable or continuous sealer), but the basic steps are roughly similar. Here are some common ways to use a sealer:

Manual sealer

Power on:

Connect the sealer to the power supply, and the POWER indicator will light up.

Adjust the temperature:

Turn the temperature control dial to adjust the temperature according to the thickness and material of the sealing material. OFF direction is to decrease, and ON direction is to increase.

Preheating:

Wait for the sealer to preheat. The HEATING indicator will light up to indicate that it is heating. When the temperature reaches the set value, the indicator will go out.

Sealing operation:

Place the plastic bag on the joint of the sealer, press the handle, and hold for about 1-5 seconds until the plastic bag is sealed.

Touch screen sealer (or smart sealer)

Prepare ingredients and bags:

Put the ingredients in a vacuum bag.

Turn on the machine:

Open the cover of the sealer and place the mouth of the vacuum bag flatly into the vacuum tank.

Select function:

Select "Vacuum seal" or other desired function on the touch screen.

Wait for completion:

The sealer will automatically perform the sealing operation until the display shows the prompt that the operation is completed.

Portable sealer

Install the battery:

Open the battery cover, put in two batteries, and close the battery cover.

Sealing operation:

Press the sealer once at the opening of the bag to be sealed.

Continuous sealer

Start-up preparation:

Check whether the equipment components are intact, clean the surface of the equipment, and adjust the temperature, pressure, speed and other parameters of the sealer.

Preheat the equipment:

Connect the power supply, turn on the power switch, and preheat the equipment to the set temperature.

Place the product:

Place the products to be sealed neatly on the conveyor belt of the sealer.

Start the machine:

Press the start button, the continuous sealer starts working and completes the sealing operation.

Precautions
Before operating the sealer, be sure to read the sealer's manual carefully to ensure safe operation.

Avoid contact with hands or other objects in the heated area to prevent burns.

Clean and maintain the sealer regularly to ensure its normal operation and extend its service life.

The above information covers the basic usage of different types of sealers. The specific operation may vary depending on the machine model and brand. Please refer to the manual of the specific sealer for the most accurate operating instructions.