How To Use The Semi-automatic Tray Sealing Machine

Here is how to use Semi Automatic Tray Sealer:

Preparation:
Make sure the equipment is in a stable and dry working environment.
Check whether the equipment is connected to the power supply and confirm that the power supply is normal.
Check whether all parts of the equipment are intact, especially the heating device and the sealing strip.
Start-up and parameter setting:
Turn on the power supply of the equipment and let the equipment preheat for a few minutes to reach the working temperature.
Set the appropriate heating temperature and sealing time according to the material characteristics of the required sealing.
Operation steps:
Place the tray to be sealed on the conveyor belt of the sealing machine and ensure that the tray is in the correct position.
Press the start button, the equipment starts to operate, and the conveyor belt slowly sends the tray into the sealing area.
The sealing head will press down and heat to seal the tray.
After sealing, the conveyor belt will send out the sealed tray, and the operator will remove the sealed tray.
Maintenance and maintenance:
After use, turn off the power supply of the equipment and clean the surface and internal residues of the equipment.
Check the heating device and sealing strip of the equipment regularly to ensure that they are working properly and replace them if necessary.
Avoid putting your hands or other objects into the sealing area when the device is working to avoid accidents.

If you have more questions, it is recommended to consult the device's manual or consult the manufacturer's technicians.