English
Español
Português
Italiano
Français
Indonesia
What To Do If The Tray Of The Automatic Sealing Machine Does Not Move
When Tray Sealing Machine does not move, you can try the following solutions:
1. Check the rack
The in and out film of the automatic sealing machine is generally achieved by moving the rack up and down. First, it is necessary to check whether there are debris or damage in various parts of the rack, especially the rails, sliders and other parts, which need to be kept clean to ensure normal in and out film.
2. Check the transmission chain
The transmission chain is also an important part of the in and out film. Check whether the transmission chain is loose, lacks lubrication and other problems. If so, it is necessary to adjust or replace the chain in time to ensure the normal operation of the transmission chain.
3. Check the sensor
The in and out film of the automatic sealing machine is generally controlled by the sensor. It is necessary to check whether the connection of the sensor is normal and whether it is covered by dust. If the sensor fails, it is necessary to clean or replace the sensor in time.
4. Check the control host
The control host is a key component of the automatic sealing machine and is responsible for controlling the operation of the entire equipment. If the control host fails, it will also cause the tray to not move. At this time, it is necessary to check whether the power supply and circuit of the control host are normal. If there is any abnormality, it needs to be repaired in time.
V. Other inspections
If the above steps fail to solve the problem, you can also check whether the power supply and voltage of the equipment are stable, and whether there are other mechanical or electrical faults. If necessary, you can contact professional maintenance personnel for inspection and repair.
The above steps can usually solve the problem of the automatic sealing machine tray not moving. If the problem persists, it is recommended to contact the equipment manufacturer or professional maintenance personnel for further inspection and maintenance.
